Boray Boru manufactures hammered hollow tubes in accordance with TS 5317 / DIN 2395 / EN 10219-1 / EN 10305 standards. Production is possible with HR (Black) and CR (cold-rolled steel) raw materials in thicknesses up to 5mm and lengths up to 12m. The profile surfaces are coated with protective oil. Crushing and edge widening tests are performed on the profiles in accordance with TSE standards.
Our Hammered Hollow Tubes products are manufactured by Boray Boru in full compliance with TS 5317, DIN 2395, EN 10219-1 and EN 10305 standards. Shaped with a special forging technique, these profiles offer both aesthetic and structural advantages thanks to their high strength and smooth corner structure.
HR (Black) and CR (DKP) raw material options are used in production, offering thicknesses up to 5 mm and lengths up to 12 meters. Its forged corner structure provides ideal solutions, especially for steel structures, machine manufacturing, railing and fence systems, load-bearing frames, and industrial applications.
T-profile surfaces are coated with protective oil to increase corrosion resistance and ensure long-lasting use. Furthermore, crushing and edge widening tests, conducted in accordance with TSE (Turkish Standards Institution) standards, guarantee the quality and reliability of our products.
Corner-Forged Rectangular Box Profile is a profile solution that stands out with its high load-bearing capacity and smooth corner geometry. Manufactured with the assurance of Boray Boru production, it complies with TS 5317, DIN 2395, EN 10219-1 and EN 10305 standards.
Rectangular box profiles with corner forgings, manufactured using HR (Black) and CR (DKP) sheet metal, meet different project requirements with wall thicknesses up to 5 mm and lengths up to 12 meters. Thanks to its corner forging form, higher strength and a smooth surface are obtained at the profile corners; this provides a significant advantage, especially in load-bearing systems, platform and chassis manufacturing, industrial racking systems, and architectural applications.
Coating the profile surfaces with protective oil provides extra protection against rust, while post-production crushing and edge widening tests ensure the products' compliance with TSE standards and their mechanical strength.
